Applying Ready-Made DTF Transfers to Garments

Product tutorial · Practical application

Applying Ready-Made DTF Transfers to Garments

Press ready-made direct-to-film transfers onto suitable garments with strong adhesion and a clean professional finish.

Beginner friendlyAbout 20 minutesProduct application
Product imageAdd the approved product photograph when available.

What you need

  • A ready-made DTF transfer
  • Suitable clean garment
  • Heat press
  • Protective finishing sheet or paper

Step-by-step

1

Inspect the transfer

Check the image, orientation and film for damage before heating the garment.

2

Prepare the garment

Remove lint, flatten the printable area and pre-press briefly when recommended.

3

Position the transfer

Place the printed transfer against the garment with the carrier facing upward.

4

Press evenly

Use the transfer supplier’s specified time, temperature and pressure.

5

Peel as directed

Peel hot, warm or cold using one smooth movement while supporting the garment.

6

Finish press

Cover the design and repress only when recommended to improve finish and durability.

Common problems

Problem Likely cause Try this
Edges lift Pressure, temperature or peel timing is wrong Check the supplier instructions and repress if permitted
Texture feels rough A finishing press is required Use the recommended protective sheet
Fabric mark appears Too much heat or pressure Test the garment and reduce carefully